Champion Inks® UV-1000 Multi-Purpose UV Curable Reducer – Quart – For Viscosity & Flow Control
Fine-tune press performance with UV-1000 Reducer, a one-part, low-odor additive formulated to lower viscosity, improve flow & leveling, and reduce squeegee drag in UV-curable screen inks. Optimized for Champion Inks® UV-1000 series and compatible UV screen systems, this reducer helps eliminate orange peel, fisheyes, and skip marks—while maintaining cure integrity and adhesion when used as directed.
Key Features & Benefits
-
Controlled Viscosity Reduction – Enhances flow without over-thinning your ink body.
-
Smoother Laydown – Levels the ink film to minimize streaks and surface defects.
-
Press Efficiency – Lowers squeegee pressure and heat build-up for longer screen life.
-
Wide System Compatibility – Designed for UV-1000 inks; suitable with most UV screen systems (spot test recommended).
-
Single-Component – Add directly to ink; no catalyst required.
Recommended Use & Mix Ratios
-
General reduction: Add 1–3% by weight to improve flow and printability.
-
Heavy graphics / fine detail: Up to 5% by weight for enhanced leveling.
-
Maximum: Do not exceed 8% by weight—excessive addition can slow cure, reduce gloss, or affect adhesion/chemical resistance.
- Mix thoroughly and test print to confirm adhesion, gloss, and cure before production.
Application Notes
-
UV Dose: Reducers may increase cure latitude requirements; ensure complete UV cure (sufficient intensity and dwell time).
-
Screen Fabrics: Works across typical UV meshes; pair with solvent/UV-resistant emulsions or capillary films.
-
Substrate Range (via ink system): Coated papers, card, ABS, polystyrene, PMMA, top-coated polyester, soft/rigid vinyls (always pre-test).
-
Not for: Water-based or plastisol systems.
Technical Specifications
| Product Type |
UV-curable screen ink reducer / flow modifier |
| Use Level |
1–5% typical; 8% max by weight |
| Cure Notes |
Verify full UV cure post-addition (lamp intensity & belt speed) |
| Compatibility |
Champion Inks® UV-1000 series; most UV screen inks (spot test) |
| Appearance |
Clear, low-odor liquid |
| Shelf Life |
12 months (unopened, stored properly) |
Coverage & Screens
-
Coverage: Follows base ink; reduction may slightly increase yield by improving flow.
-
Typical Mesh: 305–465 monofilament polyester for UV inks; adjust to art and deposit.
Clean-Up & Storage
-
Cleaners: UV/solvent ink wash compatible with your stencil and press.
-
Storage: 65–75°F (18–24°C), dry, sealed, away from heat/UV light.
- Close container promptly to prevent contamination.
Safety & Compliance
-
Prop 65 / RoHS: Formulated to support compliance when used with compliant UV systems.
- Use standard PPE (gloves, eye protection); ensure good ventilation. Refer to SDS.
Why Choose Champion Inks® UV-1000 Reducer?
Dial in your UV ink performance with predictable viscosity control, cleaner laydowns, and stable cure windows. UV-1000 Reducer helps you hit gloss, adhesion, and resolution targets—job after job.
